Ionic Earthing | Ground Resistance Testing Electrode | Rod Installation

Electrolytic Ion Earthing Pole Working principle JHY electrolytic ion earthing electrode is able to absorb air and moisture in soil through the top air pore, so that the chemical compound in the earthing electrode will be deliquesced and electrolytic ions are produced and released into the...

Product Details

Electrolytic Ion Earthing Pole


Model

Overall dimension

Remarks

JHY-15

Φ54×1500mm

One 1500mm long linear type

JHY-25

Φ54×2500mm

One 2500mm long linear type

JHY-30

Φ54×3000mm

One 3000mm long linear type

JHY-45

Φ54×4500mm

Combination of three 1500mm long linear or L-shape type

JHY-60

Φ54×6000mm

Combination of four 1500mm long linear or L-shape type

 

 图片49_副本.jpg


blob.png

JHY electrolytic ion earthing electrode is able to absorb air and moisture in soil through the top air pore, so that the chemical compound in the earthing electrode will be deliquesced and electrolytic ions are produced and released into the surrounding soil; the surrounding earth is actively regulated to reduce the resistivity of soil to the minimum; as a result, the conductivity of the earthing system will remain at relatively high level. The specially-made backfill material has satisfactory expansibility, absorptivity and ionic permeability, which not only guarantees that the electrode and soil always contact closely with each other to reduce contact resistance but also the surrounding temperature of electrode is effectively maintained and auxiliary conductive function of electrolytic ion is improved; as a result, the most stable effect of the earthing system is guaranteed. Moreover, the backfill material is not corrosive and will not cause pollution to surrounding environment. 


图片51.png


 图片52_副本.jpg


图片50_副本.jpg


Notes: When one set of earthing pole cannot meet resistance requirement, you can use two sets of parallel connection from several sets. The distance between rods should not be less than 5M; Outgoing lines should be used with 50mm2 copper wire strand. Crimp connection is done for outgoing lines and earthing poles. The connecting points should be treated with corrosion resistance.

Related Products

Inquiry