Continuous Casting Zinc Clad | Coated Steel Wire Strand | Rod

Zinc-clad steel earthing product Product introduction The product is the bi-metallic composite material which is formed by compositing the high purity zinc on low-carbon steel surface through special treatment process. This product integrates the advantages of zinc ribbon anode and traditional...

Product Details

Zinc-clad steel earthing product


Product introduction
The product is the bi-metallic composite material which is formed by compositing the high purity zinc on low-carbon steel surface through special treatment process. This product integrates the advantages of zinc ribbon anode and traditional galvanized steel earthing materials, so that it not only has high strength and relatively high thermal stability of steel but also is provided with the function of cathodic protection.


Main performance indexes  
 1. DC resistivity before and after short-time withstand current test≤0.11Ω.mm/m.
 2. After 10KA/1s short-time withstand current test, the product surface has no visible damage or deformation and the zinc layer is not falling off.


Product advantages

  1. The zinc-clad copper composite earthing electrode adopts low-carbon steel as the steel core which has high strength and thermal stability of steel, so as to guarantee the earthing and flow discharge function.

  2. Compared with steel, zinc, as the cladding metal, is 2.5 times better in the aspect of conductivity performance and it has better conductivity performance.

  3. As the cladding metal, zinc has relatively strong corrosion resistance property; as a result, service life is greatly extended.

  4. The zinc layer (thickness is more than 3mm) coated on the product can act as the sacrificial anode to protect ground network, underground metal structures and relevant steel equipment.


Characteristics of zinc-clad steel

  1. Unique manufacturing technology: “lowering and continuous casting” technology is adopted to composite the pure zinc on the low-carbon steel, so as to get bi-metallic composite conductor.

  2. Better anti-corrosion characteristics: The anti-corrosion property is strong enough to guarantee 50-year long service life. Internationally most advanced technology is adopted so that there is no residue in the zinc-clad copper and electrochemical corrosion is avoided; the anti-corrosion treatment is applied to the bar surface to overcome the short service life caused by earthing corrosion of the traditional flat steel and round steel.

  3. Better electric appliance performance: the surface is 0﹟ pure zinc and with the thickness of more than 3mm, the zinc layer will not be damaged, so as to guarantee good conductive property and stable electrical property.

  4. Construction convenience: Low-carbon steel which has relatively large cross section is selected for the earthing electrode of zinc-clad steel, so as to guarantee the mechanical strength, thermal stability and conductivity of this product.


  5. 图片29_副本.jpg


  6. The thick zinc layer guarantees cathodic protection of the equipment and solves two problems (cathodic protection and earthing) once for all; as a result, the engineering cost is greatly reduced.


For earthing

Calculation equation of earthing resistance of single piece of zinc-clad steel earthing electrode:

图片30.png 

In the above equation:
 R: Resistance of single piece of zinc-clad steel earthing electrode (Ω)
 ρ: Earth resistivity (Ωm)
 L: Length of zinc-clad steel earthing electrode (m)
 D: Equivalent diameter of earthing electrode (m)


For cathodic protection

Cathode current of zinc-clad steel earthing electrode
 图片31.png                              
 (Resistance of cathode body and wire is omitted here)   

In the above equation
 I: Generated current of model machine: mA/block or A/block
 E: Driving voltage of protection system, mV (general zinc anode takes 0.25V)
 R: Resistance of zinc-clad steel earthing electrode, Ω


Protection limit year of zinc-clad steel earthing electrode:
 图片32.png 

In the above equation:
 Y: Service life of zinc-clad steel earthing electrode, a
 Q: Quality of zinc-clad steel earthing electrode. Kg
 q: Actually point flow of zinc-clad steel earthing electrode, 820A. /h/kg
 J: Generating current of zinc-clad steel earthing electrode, A



Product

Model

Dia.
     (mm)

Length
     (m)

Zinc thickness (mm)

Two ends

Zinc clad steel Ground wire

JHY-SGX10*Q100

Φ10

0-100

0.5

Two ends flat

Zinc clad steel Ground wire

JHY-SGX12*Q100

Φ12

0-100

0.5

Two ends flat

Zinc clad steel Ground wire

JHY-SGX14*Q100

Φ14

0-100

0.5

Two ends flat

Zinc clad steel Ground wire

JHY-SGX16*6

Φ16

6

0.5-3

Two ends flat



 14- (3)(001).jpg       图片33_副本.jpg

Related Products

Inquiry